Innomaker - So it's very easy to get up and running in your project. Iic default address is 0x78, but for some usage cases it use 7 bit IIC address mode, So it should set to 0x3C like in Linux and adafruit's library. This miniature oled lcd display can be connect directly to any 3V or 5V microcontroller which has IIC interface without needing any kind of level shifter.

If the pin connections are incorrect, the OLED will burn up in a minute. We offer three kinds of OLED, all white, all blue, yellow & blue. For yellow & blue display, there is a two-pixel gap between the yellow pixels and the blue pixels for a good presentation. Each oled display is made of 128x64 individual OLEDs, each one is turned on or off by the controller chip.

0.96 Inch I2C IIC Serial 128x64 OLED Module LCD Display 4 Pin Font Color Yellow&Blue for Raspberry Pi Zero, Zero W, 3B, 3B+, STM32, Ardunio, Beaglebone Black and any Microcontroller with IIC interface - The 096 inch i2c iic serial oled is an advanced display which is self light emissive, high contrast, low power consumptive, high response, and large view angle, no backlight is required. Dimensions description: >>Module Size: 27. 5lmm×27. 8wmm×3. 0hmm >>view Area: 23. 74mm×13.

Weitere Informationen über Innomaker

SunFounder IIC I2C TWI Serial 2004 20X4 LCD Module Shield for Arduino Uno Mega2560 MEHRWEG

SunFounder - With iic/i2c interface, it only takes two I/O port thus saving more for other usages. With this shield, you can display whatever you want by programming the Arduino board. Iic/i2c interface; only takes two I/O ports. Package included: 1 x i2c/iic lcd2004 module sunfounder i2c lcd 2004 displays characters of 4 rows with 20 characters in each.

It's in elegant blue with white contents displayed. You can adjust the contrast by the potentiometer at its back. You can adjust the contrast by the potentiometer at its back. If you don't want the backlight, you can also unplug the jumper cap at the LCD back. If you don't want the backlight, you can also unplug the jumper cap at the LCD back.

SunFounder IIC I2C TWI Serial 2004 20X4 LCD Module Shield for Arduino Uno Mega2560 MEHRWEG - It can display 4 rows with 20 characters for each. Works with arduino Uno/Mega2560 board. Therefore, this is a perfect choice to make your project more interesting and vivid! Specification: Working voltage: 5V DC Dimension: 60×99x22 mm I2C Address: 0x27 or 0x3F. With this lcd module shield, you can display whatever you want by programming the Arduino board, it is a perfect choice to make your project more interesting and vivid.

Features: sunfounder iic i2c twi serial 2004 20x4 lcd module Shield for Arduino Uno Mega2560 For more information, please refer to http://wiki. Sunfounder.

Weitere Informationen über SunFounder


Ähnliche Produkte